This kit includes true STOP TECH hardware for the 370z Akebono 14" rotor spec (sport brakes)
STOP TECH FRONT & REAR SPORT PADS:
309.13470 - 309.13460
* Formerly known as Street Performance Pads
* High MOT to Eliminate Fade
* Excellent Actuation, Modulation and Release
* Positive Molded for Uniform Friction Material
* Scorched to Raise Initial Cold Effectiveness
* Para-Aramid Composites for Linear Response
* Dyno Proven Performance and Service Life
* Lab-Developed Formulas with Strong Initial Bite
* Ideal for Autocross and Light Track Day Use
STOP TECH FRONT & REAR ROTORS (your choice of drilled & slotted or slotted)
127.42100L 127.42100R 127.42101L 127.42101R
StopTech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech SportStop Cross-Drilled & Slotted rotors.
SportStop Drilled & Slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every SportStop Drilled & Slotted brake rotor is produced from a high quality Centric Parts blank casting and finished in a durable e-coating for corrosion resistance.
SportStop Drilled & Slotted rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of SportStop cross-Drilled & Slotted rear replacement rotors is a great way to match the aesthetics of a StopTech Big Brake Kit with the cross-Drilled & Slotted rotor option.
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
*Power Alloy Metallurgy*
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
*Cooling Vane Design*
Nearly all SportStop Cross-Drilled & Slotted rotors have unique Drilled & Slotted hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a Drilled & Slotted hole never touches a cooling vane.
STOP TECH BRAKE LINES FRONT & REAR
Improve vehicle brake performance and feel with Stoptech Stainless Steel Braided Brake Lines.
Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.
The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.
A variety of end fittings are available to meet most application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
*Coated Teflon inner core*
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and maintains integrity with exposure to corrosive brake fluid.
*Stoptech braided brake lines protect against the elements of harsh driving conditions.*
The stainless steel braid provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.
*Testing beyond the limit is our quality assurance*
Every StopTech brake line is 100% tested in-house to a pressure of 4,500 PSI. This is almost 4 times the typical line pressure exerted by a production vehicle's master cylinder.
StopTech is a registered brake line manufacturer with the United States DOT and all StopTech Stainless Steel Brake Lines are manufactured to meet DOT Compliance Standards. StopTech Stainless Steel lines also meet or exceed FMVSS 106 and applicable international and EU standards.
MOTUL 5.1 BRAKE FLUID 3 PACK
*Application:* Brake fluids
*Quality:* 100% Synthetic
*Product Range:* Car, Motorcycle
*OEM Approvals:* FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 et DOT 3 ; SAE J 1703 ; ISO 4925 (5.1, 4 et 3)
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point of 516°F (272°C)
$850.00 Regular Price
Select: Drilled & Slotted or Slotted